Sick c4000 basic manual

Sick c4000 basic manual
.
.
Download / Read Online Sick c4000 basic manual
.
.
.

.
Top element. O P E R A T I N G I N S T R U C T I O N S C4000 Select Safety Light Curtain. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Alteration or abridgement of the document is not permitted without the explicit written approval of the company SICK AG. Mounting with swivel mount bracket . Mounting with rigid mounting bracket . Checklist for the manufacturer . These operating instructions are addressed to planning engineers, developers and the operators of plants and systems which are to be protected by one or several C4000 Select safety light curtains. Constant indication of characters, e. The physical resolution of the C4000 Select is 30 mm with a maximum protective field width of up to 21 m and available protective field heights from 300 up to 1800 mm. Correct use The C4000 Select safety light curtain must be used only as defined in section 2. It must be used only by qualified safety personnel and only on the machine where it has been installed and initialized by qualified safety personnel in accordance with these operating instructions. The operating instructions must be made available to the operator of the machine where the C4000 Select safety light curtain is installed. The machine operator is to be instructed in the use of the device by qualified safety personnel and must be instructed to read the operating instructions. Between these two units is the protective field, defined by a protective field height and a protective field width. Cascade of multiple C4000 Select systems The C4000 Select supports the cascade of up to three 1800 mm protective height C4000 Select sender and receiver pairs. When three light curtains are cascaded together, a physical barrier may be necessary to prevent optical interference between the two light curtains configured with the same beam code if they are positioned too closely together. There are two methods of implementing C4000 Select cascades. The control of the machine must be electrical. The dangerous state of the machine must be transferable at any time into a safe state. Message center for C4000 Select receiver unit Tab. You must ensure electrostatic discharge does not occur when handling the C4000 Select! An electrostatic discharge that occurs on the C4000 Select may cause damage to the electronic boards. C4000 Select represent the logical value of all devices in the cascade. Internal errors on safety capable inputs which prevent the inputs from returning to the safe state. An internal error on a safety capable input is a failure of the C4000 Select electrical input circuitry. C4000 Select systems based on the distance D between the sender of system 1 and the receiver of system 2. Scanning range Scanning range defines the strength of the C4000 Select protective field beams in order to allow for longer distances between the C4000 Select sender and receiver devices. Match the scanning range with the protective field width! If you need more advice on mirror applications, please get in touch with your local SICK representative. DIP switch setting requirements for scanning range. C4000 Select without causing a stop condition to occur. When an object that is larger than the floating blanking configuration of the C4000 Select, or when more than one object has been detected in the protective field of the C4000 Select, an immediate stop condition will occur. Persons who are in the hazardous area but not in the light path between sender and receiver are not detected by the C4000 Select system. It is therefore to be ensured that the hazardous area is fully visible and any dangerous state can only be initiated if there are no personnel in the hazardous area. Any additional response times that apply to your application must be accounted for in this Note calculation. The field of view of the sender and receiver optics is identical. The maximum value used for D is 6 m for low scanning range and 19 m for high scanning range. If the laser warning labels are covered, e. Attach the screws of the swivel mount bracket with a torque of between 2. Composition of the swivel mount bracket Part No. The mounting nuts and bolts are not included in the delivery. Attach the bolts of the side bracket with a torque of between 5 and 6 Nm. Notes accessible, allowing you later to adjust and lock the safety light curtain in position. C4000 Select receiver unit until the system is properly aligned. To activate the laser, locate the button near the DIP switches in the C4000 Select sender unit. Press the button for more than 0. Do not look into the laser aperture! WARNING longed, direct exposure to laser light may cause damage to vision. Commissioning requires a thorough check by qualified safety personnel! If you wish to readjust the alignment later, press the laser activation button on the C4000 Select sender unit. During all tests, the output LED should remain red. Operating Instructions C4000 Select C filexlib.
.
Sick c4000 basic podrecznik
Sick c4000 basic kezikonyv
Sick c4000 basic manuel
Sick c4000 basic handbook
Sick c4000 basic user manual